Electricians : 071 533 64 66

Residential | Guest Houses | Hotels | Restaurants | Commercial

Rewiring of your Home

Properties that were built before the 80's tend to have metal conduit and no earth conductor inside the conduit. The Electricians used the metal of the conduit as an Earth. Problem with that is over the years the meal conduit used was not galvanized and only painted black. This mean the quality of the earthing could possible be compromised.

Older installations could have VIR wiring, which is a cloth covered wire; again no earth conductor was used.

Then there's the Distribution Board. If there are fuses and metal clad switches / isolators, normally mounted on a wooded box. This will have to be removed, all circuit rewired and a new surface distribution board be installed.

A full quote will need to be given, and downtime.

If you own a property that is between 25-30 years old, you may be in danger: The effects of poor or worn out wiring could be potentially devastating. 

Even if the property you own is being renovated, it is essential that you know if any rewiring work is necessary, in order to alleviate any possible risks or hazards from faulty wires; faulty wires and appliances can also lead to injuries such as electrocution and potential fire hazards, which emphasises the importance of properly tending to and rewiring a property correctly.

Read on to find out more about how your property can be rewired quickly and efficiently with our expert electricians.

There are a number of noticeable factors when a property is in need of rewiring.

As mentioned before, a property that is 30 years old and has its original wiring will most likely need to be rewired, not just for safety reasons, but also in order to meet modern standards.If you are interested in purchasing an older property, a thorough check must be completed by a licensed electrician before buying, to make sure the wiring is safe.

The recommendation for an inspection is every 10 years for a property owned by you and every five years for a rented property; if you are extending part of your house or converting it, all new and updated wiring 

will need to comply with the latest Building Regulations to ensure safety and security.

As well as improving safety in a household, rewiring also creates the chance to improve your quality of life. For example, a larger number of switches and plugs can be installed with a rewire, which means that the number of appliances in a household can increase, including televisions, radios and home computers.

There are several warning signs if you are unsure whether of not your property needs rewiring- circuit breakers that trip regularly are a major sign, as they can lead to an overload in current, which means that appliances will receive too much energy from the plug. In addition, flickering or dimming lights indicate a fault in the wiring including damaged or exposed wires.

f you spot any of these warning signs, call our expert electricians to get the best experience when rewiring your property.

Switchboards need to be replaced or upgraded if they are:

  • Unsafe,
  • Not coping with the demands you are placing on them and overheat or frequently trip fuses, or
  • Not able to be extended to cover the demands of new appliances such as air conditioners or pool pumps.

If you have the old porcelain fuse boxes with fuse wire in your Brisbane home, then you definitely need to upgrade your fuse box to one with circuit breakers that protect both people and your property.

How long does it take to replace a fuse box?

Fuse boxes, like most things to do with old houses, vary from house to house. As a result, there are a few different answers to the question of the time taken to install a new fuse box.

The simplest changeover for a standard old school fuse box to a modern, safer option takes approximately 4 hours.

If you have a house older than 25 years, then generally you may need to have your mains power upgraded to comply with increased power requirements. This means upgrading the size of the cable to your fusebox and will take approximately 8 hours.

Then there are the left-field scenarios. In the olden days, fuseboxes could be pretty much anywhere on the property, which made it tricky for the poor meter reader. These days, there are a raft of legal requirements about where a switchbox must be located.

If your box is being upgraded and the location does not comply with legal requirements, then the box needs to be relocated to be less than 2 metres from the ground and within 2 metres of the front of the house to be readily accessible for meter readers. This takes a few more hours to do. In these situations, we will have a yarn with you first to give you an estimate of the time it will take.

How much does it cost to replace a fuse box with circuit breakers?

Replacing a fuse box is not as simple as unplugging the old and plugging in a new one. By law, when you upgrade your fuse box, your electrician must bring your home’s electrical wiring system up to current legal standards. This means that the cost to replace your fuse box will vary depending on what needs to be done.

Because we understand that people need to know up front what the costs are, we will provide you with a detailed quote before we start.

To give you some rough costs, a basic fusebox upgrade with safety switch protection on all necessary circuits costs between $900-$1200 depending on the number of circuits you have on your house.

If we need to upgrade your mains or relocate your fusebox, then there are additional costs involved and you could face costs of between R4000 upwards.

Should you replace your circuit breakers?

The basics of fuses or circuit breakers are the same – they detect a problem and then open the circuit to stop the current. The difference is the time it takes, what faults trigger their operation and what they protect.

Fuses and circuit breakers have undergone rapid technological changes, with recent models significantly safer and working more quickly than earlier versions.

Ceramic Fuses

Ceramic fuses (SERF –  semi-enclosed rewireable fuses) are old school forms of electrical protection for a home. These are the sort where you run fuse wire around some screws (usually in the dark while holding a torch) before plugging them back into your fuse box. They provide short-circuit and overload protection, and provide limited protection to your property and no protection from electric shocks.

Plugin Circuit Breaker

The next development in fuses was a replacement plug in (plugin MCB) circuit breaker that plugged into the old porcelain fuse base. These were a step forward from juggling fuse wire in the dark, but still circuit but still only had the same protection as fuses. Home handymen used to swap them around with the wrong ratings and overload the cabling which was potentially very dangerous.

Hardwired Circuit Breakers

The first hardwired circuit breakers (MCB’s) were a step up for safety in that they couldn’t be swapped around by over enthusiastic DIYers, although quicker acting than fuses or plug in breakers they still only provide short circuit and overload protection.

Safety Switches

Safety switches (RCD’s) were the next huge step forward, as they not only protected a number of circuits, they also protected against electric shock for the first time. Generally, you had one safety switch linked to a number of circuit breakers. The main drawback of this was that when they were tripped, they would take out supply to an entire house.

Combination Safety Switches/Circuit Breakers

The most modern type of switches are combination safety switches and circuit breakers (RCBO’s). These protect single circuits from shorts, overloads and electric shocks. This means any problem is confined to that one circuit and will not take out the circuits for the rest of your house. The other advantage is that nuisance trips become a virtual thing of the past as each circuit has its own “earth fault” limit as opposed to having one Safety switch protecting numerous circuits.

So, in summary, if your house has ceramic or plug in fuses, then you really need your fusebox upgraded to the current standards.

If you have older style circuit breakers or a number of breakers connected to a safety switch, then it pays to replace them with combination switches (RCBO’s) for greater safety and peace of mind, and to reduce nuisance tripping.